Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Auction address
Online
Oakdale, CA
95361
United States
Complete CNC Machine Shop: Retirement of Valley Precision Inc. Owner
Auction dates
Starts:
Dec 30, 2025 10:00 AM PT
Ends from:
Jan 13, 2026 10:00 AM PT
Viewing dates
By appointment only
Jan 12, 2026 09:00 AM - 03:00 PM PT
|
Auction currency
|
USD |
|
Buyer's premium
|
18 % |
|
Sales tax
|
8.38 % |
|
Accepted cards
|
We found 48 items matching your search
Refine results
Filter by
Primary Category
Category
Brand
Item Type
Country
State/Province
Town/City
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BID QUICKLY. LOTS ARE STAGGERED TO END EVERY45- 60 SECONDS WHEN AUCTION BEGINS CLOSING AND WILL BE EXTENDED BY 7 MINUTES FROM TOP BID.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
PICKUP / REMOVAL DATES & TIMES: . PICK UP IS BY APPOINTMENT ONLY, MONDAY-FRIDAY. ALL INFORMATION FOR PICK-UP WILL BE ON THE WINNERS EMAIL INCLUDING EXACT ADDRESS AND POINT OF CONTACT.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
ASSETS ARE LOCATED IN . MAKE SURE TO CHECK ITEM LOCATION BEFORE BIDDING. FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
CLAUSING 1687 4-HEAD VERTICAL DRILL PRESS SN: 528644
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT VERTICAL MILL WITH BOSCH AND LOMB ACU-RITE II DRO SN: 155252
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT SERIES I 2 HP VERTICAL MILL WITH BOSCH AND LOMB ACU-RITE III DRO SN: 237771 SPECIFICATIONS: 2HP VARIABLE SPEED 2J HEAD 9" X 42" TABLE T-SLOTS CENTERS 3 @ 2.5IN. (64MM) T-SLOT SIZE 0.625IN. (16MM) HEIGHT ABOVE FLOOR (MAX.) 47.25IN. (1200MM) WEIGHT OF WORKPIECE (MAX.) 750LBS. (340KG.) 36" X-AXIS 12" Y-AXIS (SADDLE) 5" QUILL 16" Z-AXIS (KNEE) All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT SERIES I 2 HP VERTICAL MILL WITH BOSCH AND LOMB ACU-RITE DRO, VFD SN: 235720 SPECIFICATIONS: 2HP VARIABLE SPEED 2J HEAD 9" X 42" TABLE T-SLOTS CENTERS 3 @ 2.5IN. (64MM) T-SLOT SIZE 0.625IN. (16MM) HEIGHT ABOVE FLOOR (MAX.) 47.25IN. (1200MM) WEIGHT OF WORKPIECE (MAX.) 750LBS. (340KG.) 36" X-AXIS 12" Y-AXIS (SADDLE) 5" QUILL 16" Z-AXIS (KNEE) All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1983 PONCHO SJ1740G 17" X 40" HIGH PRECISION SPEED LATHE SN: 204015 SPECIFICATIONS: SWING 17" MAX. CENTERS 40" SPINDLE SPEED 2,000 RPM MAIN UNIT DIMENSIONS 86" X 33" X 53" MAIN UNIT APPROX WEIGHT 4,000 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT SERIES I 2 HP EZ TRAK CNC VERTICAL MILL, BRIDGEPORT CNC CONTROL, COLD GUN, VFD SN: 277289E SPECIFICATIONS: RANGE TABLE TRAVEL (X-AXIS): 30 IN (762 MM) SADDLE TRAVEL (Y-AXIS): 12 IN (305 MM) SPINDLE TRAVEL (Z-AXIS): 5 IN (127 MM) POSITIONING AUTO (X, Y): 100 IPM (2540 MM/MIN) MANUAL (X, Y): 100 IPM (2540 MM/MIN) FEEDRATE RANGE (X, Y): 0.1–100 IPM (2–2540 MM/MIN) MINIMUM INCREMENT: 0.0001 IN (0.001 MM) TABLE OVERALL SIZE: 48 × 9 IN (1219 × 229 MM) T-SLOTS: 3 ON 2.5 IN (63.5 MM) CENTERS T-SLOT SIZE: 0.625 IN (16 MM) HEIGHT ABOVE FLOOR (MANUAL): 47.4 IN (1204 MM) MAXIMUM VERTICAL LOAD UNIFORM DISTRIBUTION: 300 LBS (136 KG) SPINDLE A.C. SPINDLE MOTOR RATING (CONTINUOUS): 2 HP (1.5 KW) POWER RATING (DUTY CYCLE): 3 HP (2.2 KW) 30-MINUTE DUTY RATED POWER INPUT POWER: 208/230/460 VOLTS 3-PHASE, 50/60 CYCLES POWER CAPACITY: 4 KVA MACHINE AND CONTROL PERFORMANCE POSITIONING ACCURACY: ±0.001 IN (0.025 MM) OVER SADDLE POSITIONING REPEATABILITY: ±0.0008 IN (0.02 MM) OVER SADDLE INPUT RESOLUTION: 0.0001 IN (0.001 MM) SERVO RESOLUTION: 0.0001 IN (0.001 MM) DISPLAY RESOLUTION: 0.0001 IN (0.001 MM) SPACE AND WEIGHT FLOOR AREA (DOOR OPEN): 98 × 87 IN (2489 × 2210 MM) FLOOR AREA (DOOR CLOSED): 98 × 64 IN (2489 × 1626 MM) HEIGHT: 82 IN (2082 MM) WEIGHT: 2100 LBS (953 KG) MILLING HEAD SPECIFICATIONS — MODEL 2J POWER: 2.0 HP MOTOR RPM: 1800 RPM SPEED RANGES (RPM) LOW: STEPLESS 60–500 HIGH: STEPLESS 500–4200 QUILL QUILL TRAVEL: 5.0 IN (127 MM) QUILL DIAMETER: 3.375 IN (86 MM) SPINDLE SPINDLE TAPERS: R-8 OR #30 Q.C. SPINDLE DIAMETER: 1.875 IN (48 MM) SPINDLE FEED RATE 0.0015 IN/REV (0.038 MM) 0.003 IN/REV (0.076 MM) 0.006 IN/REV (0.152 MM) DRILLING CAPACITY MANUAL: 0.87 IN (22 MM) DIAMETER POWER: 0.37 IN (9.4 MM) DIAMETER BORING CAPACITY 6.75 IN (152.4 MM) DIAMETER MILLING CAPACITY 2.0 CU. IN./MIN (32 CC/MIN) SPINDLE TO COLUMN MINIMUM: 6.75 IN (171 MM) MAXIMUM: 18.75 IN (476 MM) All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
HARDINGE MODEL HC CHUCKER TURRET LATHE SPECIFICATIONS: SPINDLE CAPACITY: WITH ROUND 5C HARDINGE COLLETS: 1⅛" WITH HEXAGON 5C HARDINGE COLLETS: 1" WITH SQUARE 5C HARDINGE COLLETS: ⅞" WITH 5C HARDINGE STEP CHUCKS: UP TO 6" WITH JAW CHUCKS: 6" WITH JAW CHUCKS (THROUGH SPINDLE): 1⅜" SPINDLE NOSE DIAMETER: 2½" SPINDLE NOSE THREAD: 2.188" – 10 R.H. MAXIMUM FIXTURE DIAMETER: 7½" MAXIMUM DIAMETER FOR THREADING: 6" EXTERNAL / 5" INTERNAL MAXIMUM LENGTH FOR THREADING: 6" MAXIMUM DISTANCE FROM FACE OF TURRET TO SPINDLE: 9" TRAVEL OF CROSS SLIDE: 4¼" CROSS SLIDE POWER FEED RANGE: 1/64" TO 6¼" PER MIN. CARRIAGE POWER FEED RANGE: ¼" TO 10" PER MIN. SPINDLE SPEEDS: LOW SPEEDS: 125 TO 1100 RPM HIGH SPEEDS: 1100 TO 3000 RPM WEIGHT OF MACHINE WITH REGULAR EQUIPMENT: 1750 LBS. All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1991 KITAMURA MYCENTER-1 CNC VERTICAL MACHINING CENTER, VMC SN; 02436 SPECIFICATIONS: WORK TABLE: 31" X 14" TRAVELS - X AXIS: 20" - Y AXIS: 14" - Z AXIS: 16" SPINDLE TAPER: BT 35 SPINDLE SPEEDS: 10,000 RPM SPINDLE MOTOR (CONT./MAX): 20 HP TOOL CAPACITY: 20 ATC All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1991 KITAMURA MYCENTER-2 CNC VERTICAL MACHINING CENTER, VMC SN: 11149 SPECIFICATIONS: TRAVELS: X-AXIS: 23" Y-AXIS: 16.9" Z-AXIS: 18" RAPID TRAVERSE RATES: 787 INCH PER MINUTE CUTTING FEED RATES: 197 IPM SPINDLE NOSE TO TABLE (MIN.- MAX.): 5" - 23" TABLE: LENGTH: 35.4" WIDTH: 16.1" MAX WEIGHT ON TABLE: 661 LBS SPINDLE: TAPER SIZE: NO. 40 SPEED RANGE: 20 - 7000 RPM SPINDLE POWER: 7.5 KW AUTOMATIC TOOL CHANGER: CAPACITY: 20 MAX TOOL WEIGHT: 17.6 LBS TOOL CHANGE TIME: 2 SECOND All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2004 CHARMILLES HD-20 CNC DRILL EDM SN: 2000200 SPECIFICATIONS: EXTERNAL DIMENSION WIDTH: 1100 MM DEPTH: 900 MM HEIGHT: 2200 MM WEIGHT: 800 KG MAX. WORK-PIECE DIMENSION WIDTH: 800 MM DEPTH: 600 MM HEIGHT: 450 MM MAX. WORK-PIECE WEIGHT WEIGHT: 400 KG CAPACITY OF DIELECTRIC 200 L FILTER (COTTON MATERIAL) 10 Μ WORKTABLE SIZE WIDTH: 600 MM DEPTH: 300 MM WORKTABLE TRAVEL X-AXIS: 350 MM Y-AXIS: 250 MM RAM SERVO TRAVEL Z-AXIS: 300–340 MM WORK HEAD TRAVEL W-AXIS: 200 MM SPINDLE ROTARY SPEED C-AXIS: 200 RPM ELECTRODE PIPE DIAMETER: Ψ0.1 – 6.35 MM ELECTRODE PIPE LENGTH 300 OR 400 MM CERAMICS GUIDE TO WORK TABLE 70–240 MM REQUIRED AIR PRESSURE 6–8 KG/CM² REQUIRED WATER PRESSURE 20–100 KG/CM² PULSE GENERATOR SPECIFICATIONS TYPE: POWER MOS-FET MAX. POWER CONSUMPTION: 3.5 KVA CURRENT: 0–9 STEPS ON TIME: 1–10 STEPS OFF TIME: 1–10 STEPS GAP: VARIABLE MAX. MACHINE CURRENT (IP = 40A): 25.60 AMP CAPACITOR: 0–15 STEP STAB: VARIABLE POWER INPUT (V): 200/220/346/380/415/575 All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
CUBIC GTV-27 CNC VERTICAL MACHINING CENTER, VMC WITH FEDEK DH-65LS2 BAR FEEDER SN: KC08127 SPECIFICATIONS: CAPACITY X AXIS TRAVEL: 300 MM (11.8 IN) Z AXIS TRAVEL: 165 MM (7 IN) BAR CAPACITY: 27 MM (1.062 IN) WORKING HOLDING SPINDLE LENGTH WITH HYDRAULIC CYLINDER & CHUCK: 762 MM (30 IN) COLLET TYPE: 5C 3-JAW CHUCK SIZE: 135 MM (5.3 IN) SPINDLE CONFIGURATION: A2-4 PRECISION POSITIONAL REPEATABILITY: 0.00127 MM POSITIONAL ACCURACY: 0.00127 MM SPINDLE RUNOUT: 0.00127 MM SIMULTANEOUS AXES: X-Z-C (3 AXES), X-C & Z-C FLAT PLANE SELECTION SPINDLE MOTOR POWER (15 MIN): 7.5 KW SPINDLE MOTOR POWER (CONTINUOUS): 5.5 KW SPINDLE RPM: 60–6000 RPM AXES RAPID TRAVEL (X, Z): 20 M/MIN AXIS MAXIMUM FEED RATE: 10.15 M/MIN SERVO MOTOR TORQUE: 4.0 NM CONT. / 8.8 NM MAX. TOOLING TOOLING CENTER HEIGHT: 42 MM COOLANT CAPACITY: 95 LITERS COOLANT PUMP POWER: 186 WATTS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2007 SOMEC PRODIGY GT-27 CNC LATHE WITH SAMSYS LEXAIR MULTI-3000 SN: 20-4253-S SPECIFICATIONS: MACHINE DIMENSIONS (L × D × H) 34" × 34" × 47" X AXIS TRAVEL (MAX) 12" Z AXIS TRAVEL (MAX) 6.5" C AXIS INDEXING, LEAST INCREMENT 0.01 DEGREES AXIS DRIVES : DIGITAL WITH BRUSHLESS MOTORS SPINDLE MOTOR 5 HP SPINDLE RPM (VARIABLE) 100 TO 6,000 RPM SPINDLE BORE 1-1/16" SPINDLE NOSE 5-C MAXIMUM CHUCK SIZE 5" TOOL PLATE CENTER HEIGHT 1/2" MAXIMUM PROGRAMMABLE FEED RATE 300 IPM MAXIMUM RAPID TRAVEL RATE 800 IPM POWER REQUIREMENT 7.5 KVA VOLTAGE 200 TO 220V ± 10% PHASE 3 COOLANT PUMP 1/4 HP COMPRESSED AIR (CLEAN, DRY) 5 SCFM MACHINE WEIGHT 3,240 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
HARDINGE CS-42 CONQUEST 42 CNC LATHE WITH HARDINGE RETRACTABLE BAR FEED SPECIFICATIONS: MAX TURNING DIAMETER: 9.1" DISTANCE BETWEEN CENTERS: 13.8" DISTANCE SPINDLE TO TURRET: 14" X-AXIS TRAVEL: 5.45" Z-AXIS TRAVEL: 13.65" BAR CAPACITY: 1-5/8” X-AXIS TRAVERSE: 472 IPM Z-AXIS TRAVERSE: 630 IPM TURRET CAPACITY: 12 STATIONS MAIN SPINDLE SPEED: 50 – 5,000 RPM SUBSPINDLE SPEED: 80 – 6,000 RPM MAX LIVE TOOL SPEED: 4,000 RPM All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
180
HARDINGE COBRA 42 CNC LATHE WITH SAMECA BAR FEEDER AND HARDINGE HAR MATIC 751 RETRACTABLE BAR FEED SN: C-787-T SPECIFICATIONS: SPINDLE CONSTRUCTION HARDINGE PRELOADED BALL BEARING SPINDLE CAPACITY WITH ROUND 5C HARDINGE COLLETS: 1-1/16" WITH HEXAGON 5C HARDINGE COLLETS: 1" WITH SQUARE 5C HARDINGE COLLETS: 7/8" WITH 5C HARDINGE STEP CHUCKS: 4", 6" WITH JAW CHUCKS: 6" WITH JAW CHUCKS (THROUGH SPINDLE): 1-3/8" SPINDLE NOSE DIAMETER 2-1/2" SPINDLE NOSE THREAD 2.188" – 10 R.H. MAXIMUM FIXTURE DIAMETER 7-1/2" MAXIMUM DIAMETER FOR THREADING 6" EXTERNAL, 5" INTERNAL MAXIMUM LENGTH FOR THREADING 6" MAXIMUM DISTANCE FROM FACE OF TURRET TO SPINDLE 9" TRAVEL OF CROSS SLIDE 4-1/4" CROSS SLIDE POWER FEED RANGE 1/64" TO 6-1/4" PER MINUTE CARRIAGE POWER FEED RANGE 1/4" TO 10" PER MINUTE SPINDLE SPEEDS LOW SPEEDS: 125 TO 1100 RPM HIGH SPEEDS: 1100 TO 3000 RPM WEIGHT OF MACHINE WITH REGULAR EQUIPMENT 1750 LBS REGULAR EQUIPMENT: FULLY ENCLOSED PRELOADED BALL BEARING HEADSTOCK WITH COOLANT SHIELD FOR SPINDLE HARDINGE DOVETAIL BED WITH HARDENED AND GROUND STEEL WAYS BALL BEARING LEVER COLLET CLOSER POWER CROSS SLIDE FEED SCREW FEED FOR CROSS SLIDE EIGHT-STATION CROSS-FEEDING TURRET WITH ADJUSTABLE STATIONS INDEPENDENT ELECTRICAL VARIABLE POWER FEED FOR TURNING, FACING, AND BORING WELDED STEEL PEDESTAL TOOL STORAGE COMPARTMENT WITH COLLET TRAY AUTOMATIC SPINDLE DRIVESHAFT BRAKE BUILT-IN COOLANT FACILITIES WITH INTEGRAL SUMP, SELF-DRAINING OIL PAN, AND INDIVIDUAL MOTORIZED PUMP 3-SELECTOR VARIABLE SPEED DRIVING UNIT: SINGLE VOLTAGE, 2-SPEED REVERSING MOTOR 125–3000 RPM LEVER-OPERATED CONTROLS FOR OPERATION ON 230 OR 460-VOLT, 60-CYCLE, 3-PHASE MAGNETIC ELECTRIC CONTROL PANEL WITH TRANSFORMER PROVIDING 110 VOLTS FOR PUSH BUTTON CONTROL TIME-LAG THERMAL OVERLOAD RELAYS LOW-VOLTAGE PROTECTION CAM-OPERATED QUICK-MAKE AND QUICK-BREAK FORWARD/REVERSE SWITCHES COOLANT PUMP SWITCH TERMINAL BLOCK FOR DIRECT CONNECTION OF POWER LINE PANEL IS A SELF-CONTAINED UNIT All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2000 BRIDGEPORT EZ- PATH III SL CNC LATHE, TOOL CABINET LOADED WITH TOOLING INCLUDED SN: 002-085118-378 SPECIFICATIONS: CAPACITY HEIGHT OF CENTERS: 290/350 MM (11.41 / 13.77 IN) DISTANCE BETWEEN CENTERS:1000 / 2000 / 3000 MM (40 / 80 / 120 IN) SWING OVER BED: 584 / 686 MM (23 / 27 IN) SWING OVER CROSS SLIDE: 306 / 406 MM (12.0 / 15.98 IN) SWING OVER CARRIAGE WINGS: 440 / 540 MM (17.32 / 21.25 IN) CROSS-SLIDE (X) TRAVEL: 360 / 360 MM (14.17 / 14.17 IN) BED WIDTH: 380 MM (15 IN) HEIGHT: 380 MM (15 IN) HEADSTOCK SPINDLE NOSE (ASA): 80 MM (A2-8") SPINDLE BORE: 3 1/8 IN HOLE DIAMETER THROUGH SPINDLE: 80 MM RANGE OF SPINDLE SPEEDS (SWING OVER BED 23") RANGE I: 32 TO 2500 RPM RANGE II: 32 TO 625 RPM RANGE OF SPINDLE SPEEDS (SWING OVER BED 27") RANGE I: 25 TO 2000 RPM RANGE II: 25 TO 500 RPM RANGE III: 500 TO 2000 RPM FEEDS (Z AXIS) LONGITUDINAL RAPID TRAVERSE: 394 IN/MIN Z-AXIS FEED: 10,000 MM/MIN FEEDS (X AXIS) CROSS RAPID TRAVERSE: 295 IN/MIN X-AXIS FEED: 7500 MM/MIN All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
SOUTHBEND 22" TURN-NADO LATHE, DRO, TAILSTOCK, 12" BUCK CHUCK SN: 108CK SPECIFICATIONS: SWING OVER WAYS: 22" SWING OVER CROSS SLIDE: 14" SWING IN GAP: 31" DISTANCE FROM SPINDLE NOSE TO END OF THE GAP: 11-1/2' VARIABLE SPINDLE SPEEDS 60 TO 1800 RPM VIA (4) GEARED RANGES & 15 HP VARI SPEED MOTOR SPINDLE NOSE: D1-8 SPINDLE BORE: 3-1/16" (40) CARRIAGE FEEDS: .0015 TO .040 TPR (40) CROSS SLIDE FEEDS: .00075 TO .020 TPR INCH THREADING: 2 TO 72 TPI METRIC THREADING: .4 TO 14 MM MODULAR THREADING: .3 TO 3.5 TAILSTOCK QUILL DIAMETER: 3" QUILL TRAVEL: 7" #5 MT TAPER IN QUILL 2-SPEED QUILL TRAVEL All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2004 CHARMILLES ROBOFIL 240 CC CNC WIRE EDM, ELECTRICAL DISCHARGE MACHINE SN: 921248 SPECIFICATIONS: MACHINING MODE: SUBMERGE MACHINE DIMENSIONS (W × D × H): 2020 × 2050 × 2000 MM MACHINED RESERVOIR WEIGHT: 2450 KG RESERVOIR WEIGHT: 320 KG TOTAL WEIGHT OF EQUIPMENT (MACHINE WITH DIELECTRIC): 3210 KG AXES X, Y, U, V, Z XY TRAVEL: 350 × 200 MM UV TRAVEL: 35/20/20 MM TAPER ANGLE/HEIGHT: 30° / 200 MM MOVEMENT MEASUREMENT SYSTEM: LINEAR SCALE XYUVZ MEASUREMENT RESOLUTION: 0.0005 MM (XY) / +3 / −2 ΜM MACHINING MAXIMUM SPEED: 300 MM²/MIN PEAK AVERAGE SPEED: 100 MM²/MIN SYSTEMATIC ANTI-COLLISION: 3 AXES WORK AREA MAX. PART WEIGHT: 750 KG MAX. PART DIMENSIONS (W × D × H): 1000 × 550 × 320 MM HEIGHT OF CLAMPING TABLE FROM FLOOR: 680 ± 50 MM MAXIMUM WORK TANK DOOR HEIGHT: 820 MM MAXIMUM DIELECTRIC LEVEL: 0–720 MM ADJUSTMENT OF DIELECTRIC LEVEL: AUTOMATIC FILLING TIME (FROM TANK TO MAX. LEVEL): 30 SECONDS FLUSHING PROGRAMMABLE PRESSURE LEVELS: 4 INJECTION PRESSURE (UPPER & LOWER NOZZLE): 2 / 4 / 8 / 13 BAR WIRE STANDARD WIRE GUIDE: 0.25 MM OPTIONAL WIRE GUIDE: 0.07 TO 0.3 MM PROGRAMMABLE SPEED OF WIRE UNSPOOLING: 0–15 M/MIN PROGRAMMABLE TRACTION FORCE OF WIRE: 2.5 TO 25 N WIRE SPEED: 12 M/MIN MIN. DIAMETER OF HOLE FOR AUTOMATIC THREADING: 0.10 / 0.25 / 0.30 MM MAXIMUM HEIGHT FOR AUTOMATIC THREADING: 200 MM PERMISSIBLE WEIGHTS & TYPES OF REEL (DIN STANDARD) DIN K100: 1.8 KG DIN K125: 3.5 KG DIN K160: 8 KG PERMISSIBLE WEIGHTS & TYPES OF REEL (JIS STANDARD) JIS P3: 3 KG JIS P5: 5 KG DIELECTRIC TYPE: DEIONIZED WATER TOTAL VOLUME OF DIELECTRIC: 760 LITERS CLEAN WATER VOLUME OF DIELECTRIC: 250 LITERS DIRTY WATER VOLUME OF DIELECTRIC: 510 LITERS FILTERING CARTRIDGES: 2 DEIONIZATION BOTTLE: 1 VOLUME OF DEIONIZATION RESIN: 20 LITERS COOLING COOLING OF DIELECTRIC: STANDARD All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2018 HAAS UMC-750SS 5 AXIS CNC VMC, VERTICAL MACHINING CENTER, TSC, BELT TYPE CHIP CONVEYOR - VISES NOT INCLUDED SN: 1156967 SPECIFICATIONS: X AXIS TRAVEL: 30" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 20" RAPID RATE X AXIS: 1,200 IPM RAPID RATE Y AXIS: 1,200 IPM RAPID RATE Z AXIS: 1,200 IPM MAX TABLE LOAD: 660 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 40 ATC MAX CUTTING 650 IPM SPINDLE NOSE TO PLATTER 4" -24" MAX TORQUE 90 FT-LBF PLATTER DIAMETER 19.7" MAX WEIGHT ON PLATTER 660 LB MAX THRUST X 2750 LBF MAX THRUST Y 2750 LBF MAX THRUST Z 3400 LBF TOOL WEIGHT 12 LB TOOL-TO-TOOL 2.8 S CHIP-TO-CHIP 3.6 S B AXIS: ROTATION TRAVEL 120 ° TO 35- ° MAX SPEED 150 °/SEC MAX TORQUE 1200 FT-LBF BRAKE TORQUE 4300 FT-LBF C AXIS: ROTATION TRAVEL 360 ° MAX SPEED 150 °/SEC MAX TORQUE 450 FT-LBF BRAKE TORQUE 3300 FT-LBF MAX SWING 27" TABLE SIZE: 19.7" X 19.7" WEIGHT: 19,100 LBS EQUIPPED WITH: THROUGH SPINDLE COOLANT 300 PSI BELT TYPE CHIP CONVEYOR 32 GB EXPANDED MEMORY COOLANT MAINTENANCE PACKAGE 5-AXIS WORKHOLDING NOT INCLUDED All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2004 CHARMILLES ROBOFIL 240 CC CNC WIRE EDM, ELECTRICAL DISCHARGE MACHINE SN: 921274 SPECIFICATIONS: MACHINING MODE: SUBMERGE MACHINE DIMENSIONS (W × D × H): 2020 × 2050 × 2000 MM MACHINED RESERVOIR WEIGHT: 2450 KG RESERVOIR WEIGHT: 320 KG TOTAL WEIGHT OF EQUIPMENT (MACHINE WITH DIELECTRIC): 3210 KG AXES X, Y, U, V, Z XY TRAVEL: 350 × 200 MM UV TRAVEL: 35/20/20 MM TAPER ANGLE/HEIGHT: 30° / 200 MM MOVEMENT MEASUREMENT SYSTEM: LINEAR SCALE XYUVZ MEASUREMENT RESOLUTION: 0.0005 MM (XY) / +3 / −2 ΜM MACHINING MAXIMUM SPEED: 300 MM²/MIN PEAK AVERAGE SPEED: 100 MM²/MIN SYSTEMATIC ANTI-COLLISION: 3 AXES WORK AREA MAX. PART WEIGHT: 750 KG MAX. PART DIMENSIONS (W × D × H): 1000 × 550 × 320 MM HEIGHT OF CLAMPING TABLE FROM FLOOR: 680 ± 50 MM MAXIMUM WORK TANK DOOR HEIGHT: 820 MM MAXIMUM DIELECTRIC LEVEL: 0–720 MM ADJUSTMENT OF DIELECTRIC LEVEL: AUTOMATIC FILLING TIME (FROM TANK TO MAX. LEVEL): 30 SECONDS FLUSHING PROGRAMMABLE PRESSURE LEVELS: 4 INJECTION PRESSURE (UPPER & LOWER NOZZLE): 2 / 4 / 8 / 13 BAR WIRE STANDARD WIRE GUIDE: 0.25 MM OPTIONAL WIRE GUIDE: 0.07 TO 0.3 MM PROGRAMMABLE SPEED OF WIRE UNSPOOLING: 0–15 M/MIN PROGRAMMABLE TRACTION FORCE OF WIRE: 2.5 TO 25 N WIRE SPEED: 12 M/MIN MIN. DIAMETER OF HOLE FOR AUTOMATIC THREADING: 0.10 / 0.25 / 0.30 MM MAXIMUM HEIGHT FOR AUTOMATIC THREADING: 200 MM PERMISSIBLE WEIGHTS & TYPES OF REEL (DIN STANDARD) DIN K100: 1.8 KG DIN K125: 3.5 KG DIN K160: 8 KG PERMISSIBLE WEIGHTS & TYPES OF REEL (JIS STANDARD) JIS P3: 3 KG JIS P5: 5 KG DIELECTRIC TYPE: DEIONIZED WATER TOTAL VOLUME OF DIELECTRIC: 760 LITERS CLEAN WATER VOLUME OF DIELECTRIC: 250 LITERS DIRTY WATER VOLUME OF DIELECTRIC: 510 LITERS FILTERING CARTRIDGES: 2 DEIONIZATION BOTTLE: 1 VOLUME OF DEIONIZATION RESIN: 20 LITERS COOLING COOLING OF DIELECTRIC: STANDARD All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2019 HAAS VF-2SS CNC VMC,VERTICAL MACHINING CENTER, TSC, 4TH AXIS DRIVE, WIPS, HSM - VISES NOT INCLUDED SN: 1168826 SPECIFICATIONS: X AXIS TRAVEL: 30" Y AXIS TRAVEL: 16" Z AXIS TRAVEL: 20" RAPID RATE X AXIS: 1,400 IPM RAPID RATE Y AXIS: 1,400 IPM RAPID RATE Z AXIS: 1,400 IPM TABLE SIZE: 36" X 18" MAX TABLE LOAD: 1,500 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 24 ATC MAX CUTTING 833 IPM MAX WEIGHT 1500 LB MAX THRUST X 1995 LBF MAX THRUST Y 1995 LBF MAX THRUST Z 3085 LBF CHIP-TO-CHIP 3.6 S COOLANT CAP 55 GAL AMPS 3 PHASE 35A (HIGH) DIMENSIONS: 106" X 101" X 101" WEIGHT: 7,800 LBS EQUIPPED WITH: THROUGH SPINDLE COOLANT WIRELESS INTUITIVE PROBING SYSTEM 4TH AXIS DRIVE CHIP AUGER AUTO AIR GUN HIGH SPEED MACHINING PROGRAMMABLE COOLANT NOZZLE THROUGH TOOL AIR BLAST All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
215
BROWN AND SHARPE 818 MICROMASTER SURFACE GRINDER WITH SONY MAGNESCALE LH10, WALKER CERAMAX MAGNETIC CHUCK SN: 523-8186-9187 SPECIFICATIONS: CAPACITY: 8″ X 18″ MAX. HEIGHT OF WORK GROUND UNDER STANDARD WHEEL: 15.5″ STANDARD WHEEL SIZE: 7″ OD X 1/4″ HOLE SPINDLE MOTOR: 1 HP SPINDLE SPEED: 1725 RPM TABLE WORKING SURFACE: 8″ X 18″ LONGITUDINAL TABLE TRAVEL: 22″ CROSS TRAVEL: 9″ VERTICAL ADJUSTMENT: 15.75″ ELECTRICAL: 460V / 3 PH All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2016 HAAS VF-3SSYT 5 AXIS CNC VMC, VERTICAL MACHINING CENTER, THROUGH SPINDLE COOLANT 300 PSI, 4 AXIS DRIVE AND WIRE & 5TH AXIS DRIVE AND WIRE CHIP AUGER, PROGRAMMABLE COOLANT, HIGH SPEED MACHINING, HAAS WIFI CONNECT AND WIPS - VISES NOT INCLUDED SN: 1133446 SPECIFICATIONS: X AXIS TRAVEL: 40" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 1,400 IPM RAPID RATE Y AXIS: 1,400 IPM RAPID RATE Z AXIS: 1,400 IPM MAX TABLE LOAD: 3,500 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 BT TOOL CHANGER: 40 ATC MAX CUTTING 833 IPM MAX THRUST X 3085 LBF MAX THRUST Y 3085 LBF MAX THRUST Z 3923 LBF MAX TOOL WEIGHT 12 LB TOOL-TO-TOOL (AVG) 2.8 S CHIP-TO-CHIP (AVG) 3.6 S TABLE SIZE: 54" X 25" DIMENSIONS: 154" X 102" X 109" WEIGHT: 16,500 LBS EQUIPPED WITH: 200 MM COMPACT TILTING 2 AXIS TRUNION ROTARY TABLE WITH SCALE THROUGH SPINDLE COOLANT 300 PSI 4 AXIS DRIVE AND WIRE & 5TH AXIS DRIVE AND WIRE CHIP AUGER PROGRAMMABLE COOLANT HIGH SPEED MACHINING HAAS WIFI CONNECT WIRELESS INTUITIVE PROBING SYSTEM All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BROWN AND SHARPE 612 6" X 12" SURFACE GRINDER WITH WALKER CERAMAX MAGNETIC CHUCK SN: 523-612-3454 SPECIFICATIONS: WORKTABLE SIZE 6" X 12" GRINDS WORK TO HEIGHT OF 12" WHEEL SIZE 8" X1/2" SPINDLE SPEED 2850 SPINDLE MOTOR 1 HP WEIGHT APPROXIMATELY 1425 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2020 HAAS UMC-500 5 AXIS CNC VMC, 15K RPM SPINDLE, TSC, BELT TYPE CHIP CONVEYOR, HSM - VISES NOT INCLUDED SN: 1175311 SPECIFICATIONS: X-AXIS: 24″ Y-AXIS: 16″ Z-AXIS: 16″ SPINDLE NOSE TO PLATTER: 4″-20″ SPINDLE SPEED: 15,000 RPM SPINDLE MOTOR: 30 HP TAPER: CAT 40 B-AXIS: 120°- 35-° MAX. SPEED: 50 °/SEC C-AXIS: 360° MAX. SPEED: 50 °/SEC PLATTER SIZE: 15.7″ MAX. WEIGHT ON PLATTER: 500 LBS TOOL CAPACITY: 50+1 FEED CUTTING TIME: 692 HOURS DIMENSIONS: 128″X92″X101″ WEIGHT: 11,900 LBS EQUIPPED WITH: 15,000 RPM SPINDLE BELT TYPE CHIP CONVEYOR THROUGH SPINDLE COOLANT 300 PSI HIGH SPEED MACHINING HIGH SPEED SIDE MOUNT TOOL CHANGER, 50+1 TOOL CAPACITY 32 GB EXPANDED MEMORY THROUGH TOOL AIR BLAST 5-AXIS WORKHOLDING NOT INCLUDED All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
HARIG SUPER 612 6" X 12" SURFACE GRINDER WITH WALKER CERAMAX MAGNETIC CHUCK SPECIFICATIONS: GRINDING CAPACITY 6″ X 12″ STANDARD WHEEL SIZE: 7″ X 1/2″ X 1-1/4″ HOLE MAXIMUM WHEEL DIAMETER: 8″ MAXIMUM DISTANCE CENTER OF SPINDLE TO TABLE: 15″ MOTOR HP: 1 ELECTRICAL: 230V/3PH EQUIPPED WITH 6″ X 12″ CERAMAX MAGNETIC CHUCK All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2018 HAAS SUPER MINI MILL 2 CNC VMC, 4TH AXIS DRIVE, WIPS, CHIP AUGER, HSM - VISES NOT INCLUDED SN: 1145420 SPECIFICATIONS: X AXIS TRAVEL: 20" Y AXIS TRAVEL: 16" Z AXIS TRAVEL: 14" RAPID RATE X AXIS: 1,200 IPM RAPID RATE Y AXIS: 1,200 IPM RAPID RATE Z AXIS: 1,200 IPM TABLE SIZE: MAX TABLE LOAD: 500 LBS SPINDLE MOTOR: 15 HP SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: 40 TOOL CHANGER: 20 ATC MAX CUTTING: 833 IPM MAX THRUST X: 2000 LBF MAX THRUST Y: 2000 LBF MAX THRUST Z: 2000 LBF DIRECT DRIVE BELT DRIVE SPINDLE NOSE TO TABLE: 4-18" MAX TOOL DIAMETER (FULL): 3.5" MAX TOOL WEIGHT: 12 LB TOOL-TO-TOOL (AVG): 4.2 S CHIP-TO-CHIP (AVG): 4.5 S COOLANT CAPACITY: 40 GAL DIMENSIONS: WEIGHT: 5,500 LBS EQUIPPED WITH: WIRELESS INTUITIVE PROBING SYSTEM 4TH AXIS DRIVE HIGH SPEED MACHINING CHIP AUGER COOLANT TANK OIL SKIMMER ENCLOSURE EXHAUST SYSTEM All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT SERIES I 2 HP VERTICAL MILL WITH ACU-RITE II DRO, KURT D675 VISE SN: 224790 SPECIFICATIONS: TABLE SIZE: 9" X 42" LONGITUDINAL TABLE TRAVEL: 30" CROSS TRAVEL: 12" KNEE VERTICAL TRAVEL: 16" QUILL TRAVEL: 5" SPINDLE SPEEDS:60-4200 RPM, VARIABLE VERTICAL CAPACITY: 0 - 18" THROAT SIZE: 6-3/4" MINIMUM TO 18-3/4" MAXIMUM DRILL CAPACITY: 3/4" MANUAL/ 3/8" POWER FEED SPINDLE NOSE TAPER: R-8 OVERALL DIMENSIONS: 76"(W) X 63"(D) X 78" HIGH ESTIMATED WEIGHT: 2,130 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2024 HAAS VF-2SS CNC VMC, VERTICAL MACHINING CENTER, 4TH AXIS WIRING, WIPS, TSC, CHIP AUGER - VISES NOT INCLUDED SN: 1212037 SPECIFICATIONS: SIZE: 52" X 19.5" NUMBER OF PALLETS: 2 TRAVELS X AXIS 30.00 IN Y AXIS 16.00 IN Z AXIS 20.00 IN SPINDLE NOSE TO TABLE (~ MAX) 24.0 IN SPINDLE NOSE TO TABLE (~ MIN) 4.0 IN SPINDLE MAX RATING 30.0 HP MAX SPEED 12000 RPM MAX TORQUE 90.0 FT-LBF @ 2000 RPM DRIVE SYSTEM INLINE DIRECT-DRIVE TAPER CT40 | BT40 | HSK-A63 BEARING LUBRICATION AIR / OIL INJECTION COOLING LIQUID COOLED TABLE LENGTH 36.0 IN WIDTH 14.0 IN T-SLOT WIDTH 0.626 IN TO 0.630 IN T-SLOT CENTER DISTANCE 4.92 IN NUMBER OF STD T-SLOTS 3 MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 1500 LB FEEDRATES MAX CUTTING 833 IPM RAPIDS ON X 1400 IPM RAPIDS ON Y 1400 IPM RAPIDS ON Z 1400 IPM AXIS MOTORS MAX THRUST X 1995 LBF MAX THRUST Y 1995 LBF MAX THRUST Z 3085 LBF TOOL CHANGER TYPE SMTC CAPACITY 30+1 MAX TOOL DIAMETER (FULL) 2.5 IN MAX TOOL DIAMETER (ADJACENT EMPTY) 5.0 IN MAX TOOL LENGTH (FROM GAGE LINE) 11.00 IN MAX TOOL WEIGHT 12.0 LB TOOL-TO-TOOL (AVG) 1.80 S CHIP-TO-CHIP (AVG) 2.40 S GENERAL COOLANT CAPACITY 55 GAL EQUIPPED WITH: AUTO-DOOR WIRELESS INTUITIVE PROBING SYSTEM THROUGH SPINDLE COOLANT 300 PSI CHIP AUGER AUTO AIR GUN PROGRAMMABLE COOLANT NOZZLE THROUGH TOOL AIR BLAST All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
BRIDGEPORT SERIES I 2 HP EZ TRAK CNC VERTICAL MILL, BRIDGEPORT CNC CONTROL, KURT D688 VISE, VFD SN: 280165E SPECIFICATIONS: RANGE TABLE TRAVEL (X-AXIS): 30 IN (762 MM) SADDLE TRAVEL (Y-AXIS): 12 IN (305 MM) SPINDLE TRAVEL (Z-AXIS): 5 IN (127 MM) POSITIONING AUTO (X, Y): 100 IPM (2540 MM/MIN) MANUAL (X, Y): 100 IPM (2540 MM/MIN) FEEDRATE RANGE (X, Y): 0.1–100 IPM (2–2540 MM/MIN) MINIMUM INCREMENT: 0.0001 IN (0.001 MM) TABLE OVERALL SIZE: 48 × 9 IN (1219 × 229 MM) T-SLOTS: 3 ON 2.5 IN (63.5 MM) CENTERS T-SLOT SIZE: 0.625 IN (16 MM) HEIGHT ABOVE FLOOR (MANUAL): 47.4 IN (1204 MM) MAXIMUM VERTICAL LOAD UNIFORM DISTRIBUTION: 300 LBS (136 KG) SPINDLE A.C. SPINDLE MOTOR RATING (CONTINUOUS): 2 HP (1.5 KW) POWER RATING (DUTY CYCLE): 3 HP (2.2 KW) 30-MINUTE DUTY RATED POWER INPUT POWER: 208/230/460 VOLTS 3-PHASE, 50/60 CYCLES POWER CAPACITY: 4 KVA MACHINE AND CONTROL PERFORMANCE POSITIONING ACCURACY: ±0.001 IN (0.025 MM) OVER SADDLE POSITIONING REPEATABILITY: ±0.0008 IN (0.02 MM) OVER SADDLE INPUT RESOLUTION: 0.0001 IN (0.001 MM) SERVO RESOLUTION: 0.0001 IN (0.001 MM) DISPLAY RESOLUTION: 0.0001 IN (0.001 MM) SPACE AND WEIGHT FLOOR AREA (DOOR OPEN): 98 × 87 IN (2489 × 2210 MM) FLOOR AREA (DOOR CLOSED): 98 × 64 IN (2489 × 1626 MM) HEIGHT: 82 IN (2082 MM) WEIGHT: 2100 LBS (953 KG) MILLING HEAD SPECIFICATIONS — MODEL 2J POWER: 2.0 HP MOTOR RPM: 1800 RPM SPEED RANGES (RPM) LOW: STEPLESS 60–500 HIGH: STEPLESS 500–4200 QUILL QUILL TRAVEL: 5.0 IN (127 MM) QUILL DIAMETER: 3.375 IN (86 MM) SPINDLE SPINDLE TAPERS: R-8 OR #30 Q.C. SPINDLE DIAMETER: 1.875 IN (48 MM) SPINDLE FEED RATE 0.0015 IN/REV (0.038 MM) 0.003 IN/REV (0.076 MM) 0.006 IN/REV (0.152 MM) DRILLING CAPACITY MANUAL: 0.87 IN (22 MM) DIAMETER POWER: 0.37 IN (9.4 MM) DIAMETER BORING CAPACITY 6.75 IN (152.4 MM) DIAMETER MILLING CAPACITY 2.0 CU. IN./MIN (32 CC/MIN) SPINDLE TO COLUMN MINIMUM: 6.75 IN (171 MM) MAXIMUM: 18.75 IN (476 MM) All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2024 HAAS VF-2SS CNC VMC, 4TH AXIS WIRING, WIPS, TSC, CHIP AUGER - VISES NOT INCLUDED SN: 1212036 SPECIFICATIONS: SIZE: 52" X 19.5" NUMBER OF PALLETS: 2 SIZE: 52" X 19.5" NUMBER OF PALLETS: 2 TRAVELS X AXIS 30.00 IN Y AXIS 16.00 IN Z AXIS 20.00 IN SPINDLE NOSE TO TABLE (~ MAX) 24.0 IN SPINDLE NOSE TO TABLE (~ MIN) 4.0 IN SPINDLE MAX RATING 30.0 HP MAX SPEED 12000 RPM MAX TORQUE 90.0 FT-LBF @ 2000 RPM DRIVE SYSTEM INLINE DIRECT-DRIVE TAPER CT40 | BT40 | HSK-A63 BEARING LUBRICATION AIR / OIL INJECTION COOLING LIQUID COOLED TABLE LENGTH 36.0 IN WIDTH 14.0 IN T-SLOT WIDTH 0.626 IN TO 0.630 IN T-SLOT CENTER DISTANCE 4.92 IN NUMBER OF STD T-SLOTS 3 MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 1500 LB FEEDRATES MAX CUTTING 833 IPM RAPIDS ON X 1400 IPM RAPIDS ON Y 1400 IPM RAPIDS ON Z 1400 IPM AXIS MOTORS MAX THRUST X 1995 LBF MAX THRUST Y 1995 LBF MAX THRUST Z 3085 LBF TOOL CHANGER TYPE SMTC CAPACITY 30+1 MAX TOOL DIAMETER (FULL) 2.5 IN MAX TOOL DIAMETER (ADJACENT EMPTY) 5.0 IN MAX TOOL LENGTH (FROM GAGE LINE) 11.0 MAX TOOL WEIGHT 12.0 LB TOOL-TO-TOOL (AVG) 1.80 S CHIP-TO-CHIP (AVG) 2.40 S GENERAL COOLANT CAPACITY 55 GAL EQUIPPED WITH: AUTO-DOOR WIRELESS INTUITIVE PROBING SYSTEM THROUGH SPINDLE COOLANT 300 PSI CHIP AUGER AUTO AIR GUN PROGRAMMABLE COOLANT NOZZLE THROUGH TOOL AIR BLAST All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2023 HAAS ST-30 CNC LATHE, TURNING CENTER, HAAS V2-A BARFEEDER, ATP, PROGRAMMABLE HYDRAULIC TAILSTOCK, BELT TYPE CHIP CONVEYOR - VISES NOT INCLUDED SPECIFICATIONS: CHUCK SIZE: 12" 3 JAW HYDRAULIC CHUCK CAPACITIES CHUCK SIZE 10.0 IN MAX PART SWING 21.0 IN MAX CUTTING DIAMETER (WITH BOT TURRET) 15.00 IN MAX CUTTING DIAMETER (WITH BMT65 TURRET) 13.75 IN MAX CUTTING LENGTH (VARIES WITH WORKHOLDING) 32.5 IN BAR CAPACITY 3.00 IN BETWEEN CENTERS 32.5 IN TRAVELS X AXIS 9.40 IN Z AXIS 32.50 IN FEEDRATES RAPIDS ON X 945 IPM RAPIDS ON Z 945 IPM AXIS MOTORS MAX THRUST X 4100 LBF MAX THRUST Z 5100 LBF SPINDLE SPINDLE NOSE A2-6 MAX RATING 30.0 HP MAX SPEED 3400 RPM MAX TORQUE 300.0 FT-LBF @ 500 RPM MAX TORQUE W/OPT GEARBOX 1000 FT-LBF @ 150 RPM SPINDLE BORE Ø 3.50 IN SUB-SPINDLE CHUCK SIZE 6.5 IN SPINDLE NOSE A2-5 MAX SPEED 4100 RPM MAX SYNC SPEED W/MAIN SPINDLE 3400 RPM CHUCK THROAT Ø 1.81 IN X 1.60 IN DEEP DRAWBAR ADAPTER BORE Ø 1.81 IN X 3.09 IN DEEP DRAWBAR BORE (NON-THROUGH) Ø 1.03 IN X 4.91 IN DEEP SPINDLE BORE (WITHOUT CHUCK AND DRAWBAR INSTALLED) 2.31 IN INTEGRATED BRAKE TORQUE 17 FT-LBF SPINDLE ORIENTATION ACCURACY (REQUIRES SO) ± 0.02 ° RAPIDS (B-AXIS) 400 IPM TURRET NUMBER OF TOOLS 12-STATION BOT BORING BAR REAR CLEARANCE (FROM BACK OF TURRET ) 4.00 IN EQUIPPED WITH: AUTO TOOL PRESETTER PROGRAMMABLE HYDRAULIC CHUCK BELT TYPE CHIP CONVEYOR 32 GB EXPANDED MEMORY HAAS BAR FEEDER V2 PROGRAMMABLE CHUCK PRESSURE 12" 3 JAW HYDRAULIC CHUCK UPGRADE PARTS CATCHER SYSTEM ASSORTED QUICK CHANGE COLLETS AND COLLET CHANGING TOOL QG-65 A2-6 PULL-TO-A-STOP COLLET CHUCK All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1997 KITAMURA MYCENTER 3X CNC VMC, VERTICAL MACHINING CENTER - VISES NOT INCLUDED SN: 11644 SPECIFICATIONS: X AXIS TRAVEL: 30” Y AXIS TRAVEL: 17.9 ” Z AXIS TRAVEL: 18” DISTANCE FROM TABLE SURFACE TO SPINDLE: 5.7” ~ 23.8” TABLE SIZE: 32.3” X 16.1” NUMBER OF PALLETS: 2 MAX SPINDLE SPEED: 10,000 RPM SPINDLE HORSE POWER 15 HP SPINDLE TAPER BT 40 SPINDLE DRIVE MOTOR: AC AUTOMATIC TOOL CHANGER: 30 All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2004 KITAMURA MYCENTER 3XIF CNC VMC, VERTICAL MACHINING CENTER - VISES NOT INCLUDED SN: 12485 SPECIFICATIONS: X-AXIS TRAVEL 30" Y-AXIS TRAVEL 18" Z-AXIS TRAVEL 18" SPINDLE SPEED 20,000 RPM SPINDLE TAPER CAT 40 TOOL MAGAZINE CAPACITY 30 ATC CONTROL FANUC CHIP REMOVAL CHIP CONVEYOR All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1996 KITAMURA MYCENTER 3X CNC VMC, VERTICAL MACHINING CENTER - VISES NOT INCLUDED SN: 11594 SPECIFICATIONS: TABLE SIZE 16.1" X 35.4" MAXIMUM TABLE LOAD 1,100 LBS SPINDLE NOSE TO TABLE TOP 4.9" - 23.0" X AXIS TRAVEL 30" Y AXIS TRAVEL 17.9" Z AXIS TRAVEL 18.1" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0 - 590 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 20 - 10,000 RPM SPINDLE MOTOR (2 SPEED GEARED) 15 HP TOOL CHANGER CAPACITY 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.2 SECONDS TOOL CHANGE TIME (CHIP TO CHIP) 3.2 SECONDS MACHINE DIMENSIONS (APPROXIMATE) 102" X 98" X 104" MACHINE WEIGHT (APPROXIMATE) 11,000 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1995 KITAMURA MYCENTER 3X CNC VMC, VERTICAL MACHINING CENTER - VISES NOT INCLUDED SN: 11464 SPECIFICATIONS: TABLE SIZE 16.1" X 35.4" MAXIMUM TABLE LOAD 1,100 LBS SPINDLE NOSE TO TABLE TOP 4.9" - 23.0" X AXIS TRAVEL 30" Y AXIS TRAVEL 17.9" Z AXIS TRAVEL 18.1" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0 - 590 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 20 - 10,000 RPM SPINDLE MOTOR (2 SPEED GEARED) 15 HP TOOL CHANGER CAPACITY 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.2 SECONDS TOOL CHANGE TIME (CHIP TO CHIP) 3.2 SECONDS MACHINE DIMENSIONS (APPROXIMATE) 102" X 98" X 104" MACHINE WEIGHT (APPROXIMATE) 11,000 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1995 KITAMURA MYCENTER 3X CNC VMC, VERTICAL MACHINING CENTER - VISES NOT INCLUDED SN: 11408 SPECIFICATIONS: TABLE SIZE 16.1" X 35.4" MAXIMUM TABLE LOAD 1,100 LBS SPINDLE NOSE TO TABLE TOP 4.9" - 23.0" X AXIS TRAVEL 30" Y AXIS TRAVEL 17.9" Z AXIS TRAVEL 18.1" RAPID TRAVERSE RATE X & Y AXES 1181 IPM RAPID TRAVERSE RATE Z AXIS 945 IPM CUTTING FEED RATE 0 - 590 IPM SPINDLE TAPER CAT 40 SPINDLE SPEEDS 20 - 10,000 RPM SPINDLE MOTOR (2 SPEED GEARED) 15 HP TOOL CHANGER CAPACITY 20 STATION ATC TOOL CHANGE TIME (TOOL TO TOOL) 1.2 SECONDS TOOL CHANGE TIME (CHIP TO CHIP) 3.2 SECONDS MACHINE DIMENSIONS (APPROXIMATE) 102" X 98" X 104" MACHINE WEIGHT (APPROXIMATE) 11,000 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
HARDINGE HLV-H SUPER PRECISION TOOL ROOM LATHE - VISES NOT INCLUDED SPECIFICATIONS: SWING OVER BED: 11″ SWING OVER CARRIAGE: 9″ SWING OVER CROSS SLIDE: 6″ DISTANCE BETWEEN CENTERS: 18″ SPINDLE: HOLE THROUGH SPINDLE: 1 1/4″ SPINDLE NOSE: HARDINGE TAPERED SPINDLE SPEEDS: 125 – 3,000 RPM COMPOUND SLIDE TRAVEL: 3″ POWERFEED RANGE: 1/4″ – 7″ PER MINUTE TAILSTOCK: TAILSTOCK DIAMETER: 1 3/8″ TAILSTOCK TRAVEL: 3 3/4″ LEAD SCREW DIAMETER: 1″ – 8″ THREAD MOTOR: 1 HP / 230V / 3PH All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2012 MITUTOYO CRYSTA-APEX S7106 CMM, COORDINATE MEASURING MACHINE - VISES NOT INCLUDED SN: 62271223 SPECIFICATIONS: TRAVELS 27.6" X 39.36" X 23.62" RESOLUTION 0.000004" (0.0001MM) MAX MOVING SPEED 519MM/S (20.4"/S) (3D) MAX MEASURING SPEED 8 MM/S MAX DRIVE ACCELERATION 2,309 MM/S2 (3D) TOTAL WEIGHT 4,301 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
305
BRIDGEPORT SERIES I VERTICAL MILLING MACHINE WITH ACURITE MILLMATE DRO, MODEL 8F POWER FEED UNIT SN: 267169 SPECIFICATIONS SPINDLE MOTOR 2 HP SPINDLE SPEED RANGE 60 TO 4,200 RPM (INFINITELY VARIABLE ACROSS HIGH AND LOW RANGES) SPINDLE TAPER R-8 POWER QUILL FEED 0.0015", 0.003", 0.006" PER REVOLUTION QUILL TRAVEL 5 INCHES TABLE SIZE 9" X 42" WEIGHT APPROXIMATELY 1,930 LBS INPUT POWER 208/230/460 VOLTS, 3 PHASE All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1990 OKAMOTO ACC124DX 3 AXIS AUTOMATIC SURFACE GRINDER, 12" X 24" - VISES NOT INCLUDED SN: 63233 SPECIFICATIONS: WHEEL SIZE 12" X 2" X 5" MAXIMUM HEIGHT UNDER 12" WHEEL 13.7" TABLE SPEEDS- INFINITELY VARIABLE 0- 82 FPM MAX. LONGITUDINAL TABLE MOVEMENT MANUAL 30" AUTO CROSS FEED INCREMENT 0.002" - 0.80" AUTO CONTINUOUS CROSS FEED 4-40 FPM CROSS FEED, MANUAL, HAND FEED PER REV. 0.25 GRADUATION OF HAND WHEEL 0.001" MAXIMUM CROSS FEED, MANUAL 1.4" AUTO INCREMENTAL DOWN FEED INCREMENTS 0.00005" - 0.0015" POWER RAPID WHEEL POSITIONING RATE 16 IPM SPINDLE MOTOR 5 HP FLOOR SPACE 108" X 76" WEIGHT 5,300 LBS. All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1992 OKAMTOTO ACC12-24 DX 3 AXIS AUTOMATIC SURFACE GRINDER, 12" X 24" - VISES NOT INCLUDED SN: 63478 SPECIFICATIONS: TABLE WORKING CAPACITY- 12" X 24" MAXIMUM GRINDING WIDTH- 12" MAXIMUM GRINDING LENGTH- 24" MAXIMUM DISTANCE FROM UNDERSIDE OF 13.6” MAXIMUM WEIGHT OF WORKPIECE ON TABLE- 1,540 LBS. HYDRAULIC LONGITUDINAL FEED- 1 TO 82 F.P.M. HYDRAULIC INTERMITTENT CROSS FEED- .02 TO 0.8 I.P.M.. AUTOMATIC DOWNFEED TRAVERSE AND PLUNGE CUT- .00005" - .0015" GRADUATION OF CROSSFEED HANDWHEEL- .001" GRADUATION OF VERTICAL HANDWHEEL- .001" GRINDING WHEEL SIZE- 12" DIAMETER X 5" BORE X 1.5" WIDTH GRINDING WHEEL SPEED- 3,600 R.P.M. All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
OKAMOTO ACC 16-32 ST SURFACE GRINDER, 16" X 32" - VISES NOT INCLUDED SN: 88067 SPECIFICATIONS: TABLE SIZE: 16″ X 32″ MAX TABLE TRAVEL: 37.5″ MAX SADDLE TRAVEL: 17.4″ MAX DISTANCE BETWEEN WHEEL & TABLE: 21.5″ MAX TABLE LOAD: 1540 LBS GRINDING WHEEL SIZE: 12″ X 1.5″ X 5″ BORE GRINDING WHEEL SPEED: 1800 RPM SPINDLE MOTOR: 5HP HYDRAULIC MOTOR: 3HP All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
OKAMOTO ACC 12-24 DX 3 AXIS AUTOMATIC SURFACE GRINDER, 12" X 24" - VISES NOT INCLUDED SN: 64111 SPECIFICATIONS: TABLE WORKING CAPACITY- 12" X 24" MAXIMUM GRINDING WIDTH- 12" MAXIMUM GRINDING LENGTH- 24" MAXIMUM DISTANCE FROM UNDERSIDE OF 13.6” MAXIMUM WEIGHT OF WORKPIECE ON TABLE- 1,540 LBS. HYDRAULIC LONGITUDINAL FEED- 1 TO 82 F.P.M. HYDRAULIC INTERMITTENT CROSS FEED- .02 TO 0.8 I.P.M.. AUTOMATIC DOWNFEED TRAVERSE AND PLUNGE CUT- .00005" - .0015" GRADUATION OF CROSSFEED HANDWHEEL- .001" GRADUATION OF VERTICAL HANDWHEEL- .001" GRINDING WHEEL SIZE- 12" DIAMETER X 5" BORE X 1.5" WIDTH GRINDING WHEEL SPEED- 3,600 R.P.M. All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
1987 OKAMOTO M 1632 N AUTOMATIC SURFACE GRINDER, 16" X 32" - VISES NOT INCLUDED SN: 8514 SPECIFICATIONS: TABLE WORKING SURFACE, W X L 16" X 32" GRINDING WIDTH CAPACITY, MAXIMUM 16" GRINDING LENGTH CAPACITY, MAXIMUM 32" HEIGHT UNDER 12" GRINDING WHEEL 21.6" TABLE LOAD CAPACITY 1550 LBS GRINDING WHEEL DIAMETER, STANDARD 12" GRINDING WHEEL WIDTH, STANDARD 1.5" GRINDING WHEEL HOLE DIAMETER 1.25" TABLE LONGITUDINAL FEEDS, RANGE 1 TO 83 FPM TABLE CROSS IN-FEEDS, RANGE .02 TO .8 IPR SPINDLE VERTICAL FEEDS, RANGE .0001 TO .0015 IPR GRINDING WHEEL SPINDLE MOTOR 5 HP/1800 RPM WEIGHT, APPROXIMATELY 7900 LBS All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
OKAMOTO ACC 8-20 DX SURFACE GRINDER, 8" X 20" - VISES NOT INCLUDED SN: 62376 SPECIFICATIONS: CHUCK SIZE: 8″ X 20″ MAX DISTANCE SPINDLE / WHEEL TO TABLE: 15.7″ MAX TABLE LOAD (INCLUDING CHUCK): 440 LBS. SPINDLE DRIVE: 2 HP All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.